PI-SAFE SENSORS Inductive Safety Sensor

Inductive Safety Level SIL2/SIL3 Safety Sensor

PI-SAFE SENSORS Fail-safe Inductive sensors. No special actuator for electronic fail-safe sensor required. Enable zone: 0,5 ... 15 mm (depending on the model). 2 safety outputs. The operating principle and thus the advantages of inductive sensors can be used for safety applications. Inductive safety applications are special applications which require a non-contact and safe detection of a metal object. A wear-free function due to the non-contact principle together with a high protection rating, guarantee a high uptime of machines and installations. The PI-Safe sensor increases the uptime and safety of installations and can be connected to approved evaluation units without cross-fault monitoring. Faults such as coil break or coil short circuit are diagnosed and the sensor passes into the defined safe state. Even a cross fault between the supply voltage and one of the two outputs does not affect the safety function of the sensor. Applications include reliable positioning on rotary indexing tables and machine tools, safe triggering of slow travel or switching off in end positions for presses, gantry robots and actuators or safe area monitoring for robots

  • Fail-safe inductive sensors
  • Certification to EN 60947-5-3 for electromechanical controlgear
  • Connection to Mosaic safety controller or a PLC oi Relay
  • Operating voltage (VDC) 19,2 ... 3
  • Switching current (mA) Max. 100
  • Safety output 2 OSSD
  • Electrical design DC PNP
  • Connection M12 4-pole connector
  • Electrical design DC PNP
  • Signalling LED yellow (signal), LED green (power)
  • Protection class III
  • Safety level PL d / SIL 2 and PL e / SIL 3

  MODEL DESCRIPTION CODE
  PI-SAFE PI M12 NF Fail-safe inductive sensor - Metal Thread M12 x 1 - Length 70 mm non-flush mountable 1293000
  PI-SAFE PI M18 NF Fail-safe inductive sensor - Metal Thread M18 x 1 - Length 70,5 mm non-flush mountable 1293001
  PI-SAFE PI M18 F Fail-safe inductive sensor - Metal Thread M18 x 1 - Length 70 mm flush mountable 1293002
  PI-SAFE PI M18 FR Fail-safe inductive sensor - Metal Thread M18 x 1 - Length 86,5 mm flush mountable 1293003
  PI-SAFE PI M30 NF Fail-safe inductive sensor - Metal Thread M30 x 1,5 -Length 70 mm non flush mountable 1293004
  PI-SAFE PI M30 F Fail-safe inductive sensor - Metal Thread M30 x 1,5 - Length 70 mm flush mountable 1293005
  PI-SAFE PI M30 NF K Fail-safe inductive sensor - Metal Thread M30 x 1,5 - Length 80 mm non flush mountable - IP69K protection rating 1293006
  PI-SAFE PI SQ F-NF Fail-safe inductive sensor - Rectangular 40 x 40 x 66 mm - Non-flush or flush mountable 1293007
  PI-SAFE PI SQ NF Fail-safe inductive sensor - Rectangular 40 x 40 x 66 mm - Flush mountable 1293008